Open-Face Guide

This guide is intended to get you up and running quickly with your emteqPRO as a stand-alone device (without HMD). Simply follow the 3 simple steps below; Attaching the emteqPRO Mask your computer, running a demo application to save raw sensor data, and using our SuperVision monitoring application to view data in real-time. If at any point you need assistance consult the more detailed manuals and our FAQ or contact our support team.

The EmteqPRO Open-Face Mask is also the emteqPRO Mask for Vive Pro and can be used in either configuration.

1. Setting up the emteqPRO Mask as Open-Face

Once you receive you emteqPRO Mask you can begin by selecting either the narrow or wide side pieces and insert them into the slots on the mask. You can see more detailed instructions here.

Once done you can use the provided USB cable to attach the emteqPRO Mask to your computer. After a few seconds you should see a pop-up like this:

EmteqDAB Connected Message

Currently it is not required to pair the device via as the message suggests.
This will be a requirement as the beta program progresses.

2. Get our EmteqVR SDK Demo for Windows 10

To process and save DAB data from the emteqPRO Mask you will need an application containing Core Services. In this example we will use the

Once you have downloaded the ZIP you can unpack it somewhere and run the EmteqDemosDesktop.exe to load the application. You may receive a warning confirming that you want to run the app under Windows 10 the first time you open the application.

Desktop Demo App First Open


You will see a mask indicator in the top right of the window with values rapidly updating, this means the mask is fully connected. However if these values are on 0 you may need to plug in the mask again or restart the application.

3. Viewing Real-Time Data via SuperVision


In order to view data within the SuperVision application you will need to be running the EmteqVR SDK to process and record data from the emteqPRO mask. This can be acheived by building a Unity app with our EmteqVR SDK or by downloading one of our pre-baked demo apps that you can use to get started quickly and reference in future.

Lastly to view real time data as the mask is being used you can use our SuperVision app. Also found under the downloads page, or directly linked here.

Unpack this .zip file and install the app, once installed it will run automatically. It will be kept updated whenever a new version becomes available.

When running both EmteqVR SDK and SuperVision on the same computer the default settings will allow a connection.

If you are using the applications on different computers on the same network you will need to update the IP settings in the SuperVision app. More detailed instructions can be found here.

Desktop Demo App First Open