Manufacturer

Emteq Ltd
Sussex Innovation Centre
Brighton, United Kingdom
BN1 9SB
Tel: +44 1273 769251

support@emteqlabs.com

Purpose

The purpose of this manual is to provide a resource to help ensure the safe and efficient operation of the described equipment by users.

Before using the equipment, it is necessary to read the User Manual, note down and strictly respect all the notices indicating Warning and Precaution messages, paying particular attention to information and procedures in the paragraph “Safety”.

These User Instructions are an integral part of the equipment and must be kept near the equipment so that they may be referred to at any time.

Suggestion This box indicates a suggestion, for example to help the user or to improve an operative sequence.

Precaution A PRECAUTION message indicates where it is necessary a particular attention to ensure a safe and efficient use of the equipment. The non-observance of a precaution message can cause slight or moderate personal injuries, damage to the equipment or to other goods, and expose to a possible remote risk of more serious injury and/or environmental pollution.

Disclaimer

Emteq Ltd reserves the right to make changes according to technical progress.

The equipment described in this User Instructions must not be used together with other products or components, except in case they are explicitly indicated as compatible by the Manufacturer.

Equipment changes and/or additions must be performed by the Manufacturer or by any third party explicitly authorized by the Manufacturer.

These changes and/or additions must be in compliance with all effective laws and local rules and must be performed with the highest technical capability.

Precaution As for all technical products, maintenance or changes performed by unqualified people can cause serious damages to the equipment and may increase risk of personal injury.

Published by Emteq Ltd 2021

Emteq Ltd reserves the right to modify these User Instructions and the equipment here described.

No part of this User Instructions may be reproduced or transmitted in any form without permission in writing from Manufacturer.

The software included in the equipment belongs to the Manufacturer. Upon receipt of the equipment, the user acquires only the right to use the software. This right is neither exclusive nor transferable. It is also necessary to seek written permission from the Manufacturer before using the equipment for purposes other than those intended and specified.

The equipment specifications are subject to variations without notice. Nothing written in these User Instructions can be considered as an offer, warranty, promise or contractual condition, nor should it be so.

Compliance

We, Emteq Ltd, at following address declare under our sole responsibility that the product detailed below complies with the essential requirements of the following EU Directives,

  • Radio Equipment Directive 2014/53/EU
  • RoHS Directive 2011/65/EU
Equipment Description Biometric sensing system for VR
Make/Brand Emteq
Model Number EmteqVR

Compliance of the equipment has been demonstrated by assessment with reference to the following harmonised European Standards:

  • EN 300 328 v2.1.1 (2016-11)
  • EN 301 489-17 v3.2.0 (2017-03)
  • EN 60601-1:2006+A12:2014
Emteq Ltd.
Sussex Innovation Centre
Brighton
BN1 9SB
UK
Tel: (0) 1273 769251
e-mail: support@emteqlabs.com
web: www.emteqlabs.com

Publishing Details

Published by the manufacturer.

The manufacturer reserves the right to modify this User Instructions and the equipment here described.

The equipment specifications are subject to variations without notice. Nothing written in this User Instructions can be considered as an offer, warranty, promise or contractual condition, nor should it be so.